53 KiB
Turnbased Combat
In this lesson we will be building on the combat base to implement a combat system that works in turns and where you select your actions in a menu, like this:
> attack Troll
______________________________________________________________________________
You (Perfect) vs Troll (Perfect)
Your queued action: [attack] (22s until next round,
or until all combatants have chosen their next action).
______________________________________________________________________________
1: attack an enemy
2: Stunt - gain a later advantage against a target
3: Stunt - give an enemy disadvantage against yourself or an ally
4: Use an item on yourself or an ally
5: Use an item on an enemy
6: Wield/swap with an item from inventory
7: flee!
8: hold, doing nothing
> 4
_______________________________________________________________________________
Select the item
_______________________________________________________________________________
1: Potion of Strength
2. Potion of Dexterity
3. Green Apple
4. Throwing Daggers
back
abort
> 1
_______________________________________________________________________________
Choose an ally to target.
_______________________________________________________________________________
1: Yourself
back
abort
> 1
_______________________________________________________________________________
You (Perfect) vs Troll (Perfect)
Your queued action: [use] (6s until next round,
or until all combatants have chosen their next action).
_______________________________________________________________________________
1: attack an enemy
2: Stunt - gain a later advantage against a target
3: Stunt - give an enemy disadvantage against yourself or an ally
4: Use an item on yourself or an ally
5: Use an item on an enemy
6: Wield/swap with an item from inventory
7: flee!
8: hold, doing nothing
Troll attacks You with Claws: Roll vs armor (12):
rolled 4 on d20 + strength(+3) vs 12 -> Fail
Troll missed you.
You use Potion of Strength.
Renewed strength coarses through your body!
Potion of Strength was used up.
Note that this documentation doesn't show in-game colors. Also, if you interested in an alternative, see the previous lesson where we implemented a 'twitch'-like combat system based on entering direct commands for every action.
With 'turnbased' combat, we mean combat that 'ticks' along at a slower pace, slow enough to allow the participants to select their options in a menu (the menu is not strictly necessary, but it's a good way to learn how to make menus as well). Their actions are queued and will be executed when the turn timer runs out. To avoid waiting unnecessarily, we will also move on to the next round whenever everyone has made their choices.
The advantage of a turnbased system is that it removes player speed from the equation; your prowess in combat does not depend on how quickly you can enter a command. For RPG-heavy games you could also allow players time to make RP emotes during the rounds of combat to flesh out the action.
The advantage of using a menu is that you have all possible actions directly available to you, making it beginner friendly and easy to know what you can do. It also means a lot less writing which can be an advantage to some players.
General Principle
An example of an implemented Turnbased combat system can be found under `evennia/contrib/tutorials/evadventure/`, in [combat_turnbased.py](evennia.contrib.tutorials.evadventure.combat_turnbased).
Here is the general principle of the Turnbased combat handler:
- The turnbased version of the CombatHandler will be stored on the current location. That means that there will only be one combat per location. Anyone else starting combat will join the same handler and be assigned a side to fight on.
- The handler will run a central timer of 30s (in this example). When it fires, all queued actions will be executed. If everyone has submitted their actions, this will happen immediately when the last one submits.
- While in combat you will not be able to move around - you are stuck in the room. Fleeing combat is a separate action that takes a few turns to complete (we will need to create this).
- Starting the combat is done via the
attack <target>command. After that you are in the combat menu and will use the menu for all subsequent actions.
Turnbased combat handler
Create a new module
evadventure/combat_turnbased.py.
# in evadventure/combat_turnbased.py
from .combat_base import (
CombatActionAttack,
CombatActionHold,
CombatActionStunt,
CombatActionUseItem,
CombatActionWield,
EvAdventureCombatBaseHandler,
)
from .combat_base import EvAdventureCombatBaseHandler
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
action_classes = {
"hold": CombatActionHold,
"attack": CombatActionAttack,
"stunt": CombatActionStunt,
"use": CombatActionUseItem,
"wield": CombatActionWield,
"flee": None # we will add this soon!
}
# fallback action if not selecting anything
fallback_action_dict = AttributeProperty({"key": "hold"}, autocreate=False)
# track which turn we are on
turn = AttributeProperty(0)
# who is involved in combat, and their queued action
# as {combatant: actiondict, ...}
combatants = AttributeProperty(dict)
# who has advantage against whom. This is a structure
# like {"combatant": {enemy1: True, enemy2: True}}
advantage_matrix = AttributeProperty(defaultdict(dict))
# same for disadvantages
disadvantage_matrix = AttributeProperty(defaultdict(dict))
# how many turns you must be fleeing before escaping
flee_timeout = AttributeProperty(1, autocreate=False)
# track who is fleeing as {combatant: turn_they_started_fleeing}
fleeing_combatants = AttributeProperty(dict)
# list of who has been defeated so far
defeated_combatants = AttributeProperty(list)
We leave a placeholder for the "flee" action since we haven't created it yet.
Since the turnbased combat handler is shared between all combatants, we need to store references to those combatants on the handler, in the combatants Attribute. In the same way we must store a matrix of who has advantage/disadvantage against whom. We must also track who is fleeing, in particular how long they have been fleeing, since they will be leaving combat after that time.
Getting the sides of combat
The two sides are different depending on if we are in an PvP room or not: In a PvP room everyone else is your enemy. Otherwise only NPCs in combat is your enemy (you are assumed to be teaming up with your fellow players).
# in evadventure/combat_turnbased.py
# ...
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
# ...
def get_sides(self, combatant):
"""
Get a listing of the two 'sides' of this combat,
from the perspective of the provided combatant.
"""
if self.obj.allow_pvp:
# in pvp, everyone else is an ememy
allies = [combatant]
enemies = [comb for comb in self.combatants if comb != combatant]
else:
# otherwise, enemies/allies depend on who combatant is
pcs = [comb for comb in self.combatants if inherits_from(comb, EvAdventureCharacter)]
npcs = [comb for comb in self.combatants if comb not in pcs]
if combatant in pcs:
# combatant is a PC, so NPCs are all enemies
allies = pcs
enemies = npcs
else:
# combatant is an NPC, so PCs are all enemies
allies = npcs
enemies = pcs
return allies, enemies
Note that since the EvadventureCombatBaseHandler (which our turnbased handler is based on) is a Script, it provides many useful features. For example self.obj is the entity on which this Script 'sits'. Since we are planning to put this handler on the current location, then self.obj will be that Room.
All we do here is check if it's a PvP room or not and use this to figure out who would be an ally or an enemy. Note that the combatant is not included in the allies return - we'll need to remember this.
Tracking Advantage/Disadvantage
# in evadventure/combat_turnbased.py
# ...
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
# ...
def give_advantage(self, combatant, target):
self.advantage_matrix[combatant][target] = True
def give_disadvantage(self, combatant, target, **kwargs):
self.disadvantage_matrix[combatant][target] = True
def has_advantage(self, combatant, target, **kwargs):
return (
target in self.fleeing_combatants
or bool(self.advantage_matrix[combatant].pop(target, False))
)
def has_disadvantage(self, combatant, target):
return bool(self.disadvantage_matrix[combatant].pop(target, False))
We use the advantage/disadvantage_matrix Attributes to track who has advantage against whom.
The Python `.pop()` method exists on lists and dicts as well as some other iterables. It 'pops' and returns an element from the container. For a list, it's either popped by index or by popping the last element. For a dict (like here), a specific key must be given to pop. If you don't provide a default value as a second element, an error will be raised if the key you try to pop is not found.
In the has dis/advantage methods we pop the target from the matrix which will result either in the value True or False (the default value we give to pop if the target is not in the matrix). This means that the advantage, once gained, can only be used once.
We also consider everyone to have advantage against fleeing combatants.
Adding and removing combatants
Since the combat handler is shared we must be able to add- and remove combatants easily. This is new compared to the base handler.
# in evadventure/combat_turnbased.py
# ...
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
# ...
def add_combatant(self, combatant):
"""
Add a new combatant to the battle. Can be called multiple times safely.
"""
if combatant not in self.combatants:
self.combatants[combatant] = self.fallback_action_dict
return True
return False
def remove_combatant(self, combatant):
"""
Remove a combatant from the battle.
"""
self.combatants.pop(combatant, None)
# clean up menu if it exists
# TODO!
We simply add the the combatant with the fallback action-dict to start with. We return a bool from add_combatant so that the calling function will know if they were actually added anew or not (we may want to do some extra setup if they are new).
For now we just pop the combatant, but in the future we'll need to do some extra cleanup of the menu when combat ends (we'll get to that).
Flee Action
Since you can't just move away from the room to flee turnbased combat, we need to add a new CombatAction subclass like the ones we created in the base combat lesson.
# in evadventure/combat_turnbased.py
from .combat_base import CombatAction
# ...
class CombatActionFlee(CombatAction):
"""
Start (or continue) fleeing/disengaging from combat.
action_dict = {
"key": "flee",
}
"""
def execute(self):
combathandler = self.combathandler
if self.combatant not in combathandler.fleeing_combatants:
# we record the turn on which we started fleeing
combathandler.fleeing_combatants[self.combatant] = self.combathandler.turn
# show how many turns until successful flight
current_turn = combathandler.turn
started_fleeing = combathandler.fleeing_combatants[self.combatant]
flee_timeout = combathandler.flee_timeout
time_left = flee_timeout - (current_turn - started_fleeing) - 1
if time_left > 0:
self.msg(
"$You() $conj(retreat), being exposed to attack while doing so (will escape in "
f"{time_left} $pluralize(turn, {time_left}))."
)
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
action_classes = {
"hold": CombatActionHold,
"attack": CombatActionAttack,
"stunt": CombatActionStunt,
"use": CombatActionUseItem,
"wield": CombatActionWield,
"flee": CombatActionFlee # < ---- added!
}
# ...
We create the action to make use of the fleeing_combatants dict we set up in the combat handler. This dict stores the fleeing combatant along with the turn its fleeing started. If performing the flee action multiple times, we will just display how many turns are remaining.
Finally, we make sure to add our new CombatActionFlee to the action_classes registry on the combat handler.
Queue action
# in evadventure/combat_turnbased.py
# ...
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
# ...
def queue_action(self, combatant, action_dict):
self.combatants[combatant] = action_dict
# track who inserted actions this turn (non-persistent)
did_action = set(self.ndb.did_action or set())
did_action.add(combatant)
if len(did_action) >= len(self.combatants):
# everyone has inserted an action. Start next turn without waiting!
self.force_repeat()
To queue an action, we simply store its action_dict with the combatant in the combatants Attribute.
We use a Python set() to track who has queued an action this turn. If all combatants have entered a new (or renewed) action this turn, we use the .force_repeat() method, which is available on all Scripts. When this is called, the next round will fire immediately instead of waiting until it times out.
Execute an action and tick the round
:linenos:
:emphasize-lines: 13,16,17,22,43,49
# in evadventure/combat_turnbased.py
import random
# ...
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
# ...
def execute_next_action(self, combatant):
# this gets the next dict and rotates the queue
action_dict = self.combatants.get(combatant, self.fallback_action_dict)
# use the action-dict to select and create an action from an action class
action_class = self.action_classes[action_dict["key"]]
action = action_class(self, combatant, action_dict)
action.execute()
action.post_execute()
if action_dict.get("repeat", False):
# queue the action again *without updating the
# *.ndb.did_action list* (otherwise
# we'd always auto-end the turn if everyone used
# repeating actions and there'd be
# no time to change it before the next round)
self.combatants[combatant] = action_dict
else:
# if not a repeat, set the fallback action
self.combatants[combatant] = self.fallback_action_dict
def at_repeat(self):
"""
This method is called every time Script repeats
(every `interval` seconds). Performs a full turn of
combat, performing everyone's actions in random order.
"""
self.turn += 1
# random turn order
combatants = list(self.combatants.keys())
random.shuffle(combatants) # shuffles in place
# do everyone's next queued combat action
for combatant in combatants:
self.execute_next_action(combatant)
self.ndb.did_action = set()
# check if one side won the battle
self.check_stop_combat()
Our action-execution consists of two parts - the execute_next_action (which was defined in the parent class for us to implement) and the at_repeat method which is a part of the Script
For execute_next_action :
- Line 13: We get the
action_dictfrom thecombatantsAttribute. We return thefallback_action_dictif nothing was queued (this defaults tohold). - Line 16: We use the
keyof theaction_dict(which would be something like "attack", "use", "wield" etc) to get the class of the matching Action from theaction_classesdictionary. - Line 17: Here the action class is instantiated with the combatant and action dict, making it ready to execute. This is then executed on the following lines.
- Line 22: We introduce a new optional
action-dicthere, the booleanrepeatkey. This allows us to re-queue the action. If not the fallback action will be used.
The at_repeat is called repeatedly every interval seconds that the Script fires. This is what we use to track when each round ends.
- Lines 43: In this example, we have no internal order between actions. So we simply randomize in which order they fire.
- Line 49: This
setwas assigned to in thequeue_actionmethod to know when everyone submitted a new action. We must make sure to unset it here before the next round.
Check and stop combat
:linenos:
:emphasize-lines: 28,41,49,60
# in evadventure/combat_turnbased.py
import random
from evennia.utils.utils import list_to_string
# ...
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
# ...
def stop_combat(self):
"""
Stop the combat immediately.
"""
for combatant in self.combatants:
self.remove_combatant(combatant)
self.stop()
self.delete()
def check_stop_combat(self):
"""Check if it's time to stop combat"""
# check if anyone is defeated
for combatant in list(self.combatants.keys()):
if combatant.hp <= 0:
# PCs roll on the death table here, NPCs die.
# Even if PCs survive, they
# are still out of the fight.
combatant.at_defeat()
self.combatants.pop(combatant)
self.defeated_combatants.append(combatant)
self.msg("|r$You() $conj(fall) to the ground, defeated.|n", combatant=combatant)
else:
self.combatants[combatant] = self.fallback_action_dict
# check if anyone managed to flee
flee_timeout = self.flee_timeout
for combatant, started_fleeing in self.fleeing_combatants.items():
if self.turn - started_fleeing >= flee_timeout - 1:
# if they are still alive/fleeing and have been fleeing long enough, escape
self.msg("|y$You() successfully $conj(flee) from combat.|n", combatant=combatant)
self.remove_combatant(combatant)
# check if one side won the battle
if not self.combatants:
# noone left in combat - maybe they killed each other or all fled
surviving_combatant = None
allies, enemies = (), ()
else:
# grab a random survivor and check if they have any living enemies.
surviving_combatant = random.choice(list(self.combatants.keys()))
allies, enemies = self.get_sides(surviving_combatant)
if not enemies:
# if one way or another, there are no more enemies to fight
still_standing = list_to_string(f"$You({comb.key})" for comb in allies)
knocked_out = list_to_string(comb for comb in self.defeated_combatants if comb.hp > 0)
killed = list_to_string(comb for comb in self.defeated_combatants if comb.hp <= 0)
if still_standing:
txt = [f"The combat is over. {still_standing} are still standing."]
else:
txt = ["The combat is over. No-one stands as the victor."]
if knocked_out:
txt.append(f"{knocked_out} were taken down, but will live.")
if killed:
txt.append(f"{killed} were killed.")
self.msg(txt)
self.stop_combat()
The check_stop_combat is called at the end of the round. We want to figure out who is dead and if one of the 'sides' won.
- Lines 28-38: We go over all combatants and determine if they are out of HP. If so we fire the relevant hooks and add them to the
defeated_combatantsAttribute. - Line 38: For all surviving combatants, we make sure give them the
fallback_action_dict. - Lines 41-46: The
fleeing_combatantAttribute is a dict on the form{fleeing_combatant: turn_number}, tracking when they first started fleeing. We compare this with the current turn number and theflee_timeoutto see if they now flee and should be allowed to be removed from combat. - Lines 49-56: Here on we are determining if one 'side' of the conflict has defeated the other side.
- Line 60: The
list_to_stringEvennia utility converts a list of entries, like["a", "b", "c"to a nice string"a, b and c". We use this to be able to present some nice ending messages to the combatants.
Start combat
Since we are using the timer-component of the Script to tick our combat, we also need a helper method to 'start' that.
from evennia.utils.utils import list_to_string
# in evadventure/combat_turnbased.py
# ...
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
# ...
def start_combat(self, **kwargs):
"""
This actually starts the combat. It's safe to run this multiple times
since it will only start combat if it isn't already running.
"""
if not self.is_active:
self.start(**kwargs)
The start(**kwargs) method is a method on the Script, and will make it start to call at_repeat every interval seconds. We will pass that interval inside kwargs (so for example, we'll do combathandler.start_combat(interval=30) later).
Using EvMenu for the combat menu
The EvMenu used to create in-game menues in Evennia. We used a simple EvMenu already in the Character Generation Lesson. This time we'll need to be a bit more advanced. While The EvMenu documentation describe its functionality in more detail, we will give a quick overview of how it works here.
An EvMenu is made up of nodes, which are regular functions on this form (somewhat simplified here, there are more options):
def node_somenodename(caller, raw_string, **kwargs):
text = "some text to show in the node"
options = [
{
"key": "Option 1", # skip this to get a number
"desc": "Describing what happens when choosing this option."
"goto": "name of the node to go to" # OR (callable, {kwargs}}) returning said name
},
# other options here
]
return text, options
So basically each node takes the arguments of caller (the one using the menu), raw_string (the empty string or what the user input on the previous node) and **kwargs which can be used to pass data from node to node. It returns text and options.
The text is what the user will see when entering this part of the menu, such as "Choose who you want to attack!". The options is a list of dicts describing each option. They will appear as a multi-choice list below the node text (see the example at the top of this lesson page).
When we create the EvMenu later, we will create a node index - a mapping between a unique name and these "node functions". So something like this:
# example of a EvMenu node index
{
"start": node_combat_main,
"node1": node_func1,
"node2": node_func2,
"some name": node_somenodename,
"end": node_abort_menu,
}
Each option dict has a key "goto" that determines which node the player should jump to if they choose that option. Inside the menu, each node needs to be referenced with these names (like "start", "node1" etc).
The "goto" value of each option can either specify the name directly (like "node1") or it can be given as a tuple (callable, {keywords}). This callable is called and is expected to in turn return the next node-name to use (like "node1").
The callable (often called a "goto callable") looks very similar to a node function:
def _goto_when_choosing_option1(caller, raw_string, **kwargs):
# do whatever is needed to determine the next node
return nodename # also nodename, dict works
To make node-functions clearly separate from goto-callables, Evennia docs always prefix node-functions with `node_` and menu goto-functions with an underscore `_` (which is also making goto-functions 'private' in Python lingo).
Here, caller is still the one using the menu and raw_string is the actual string you entered to choose this option. **kwargs is the keywords you added to the (callable, {keywords}) tuple.
The goto-callable must return the name of the next node. Optionally, you can return both nodename, {kwargs}. If you do the next node will get those kwargs as ingoing **kwargs. This way you can pass information from one node to the next. A special feature is that if nodename is returned as None, then the current node will be rerun again.
Here's a (somewhat contrived) example of how the goto-callable and node-function hang together:
# goto-callable
def _my_goto_callable(caller, raw_string, **kwargs):
info_number = kwargs["info_number"]
if info_number > 0:
return "node1"
else:
return "node2", {"info_number": info_number} # will be **kwargs when "node2" runs next
# node function
def node_somenodename(caller, raw_string, **kwargs):
text = "Some node text"
options = [
{
"desc": "Option one",
"goto": (_my_goto_callable, {"info_number", 1})
},
{
"desc": "Option two",
"goto": (_my_goto_callable, {"info_number", -1})
},
]
Menu for Turnbased combat
Our combat menu will be pretty simple. We will have one central menu node with options indicating all the different actions of combat. When choosing an action in the menu, the player should be asked a series of question, each specifying one piece of information needed for that action. The last step will be the build this information into an action-dict we can queue with the combathandler.
To understand the process, here's how the action selection will work (read left to right):
| In base node | step 1 | step 2 | step 3 | step 4 |
|---|---|---|---|---|
select attack |
select target |
queue action-dict | - | - |
select stunt - give advantage |
select Ability |
select allied recipient |
select enemy target |
queue action-dict |
select stunt - give disadvantage |
select Ability |
select enemy recipient |
select allied target |
queue action-dict |
select use item on yourself or ally |
select item from inventory |
select allied target |
queue action-dict | - |
select use item on enemy |
select item from inventory |
select enemy target |
queue action-dict | - |
select wield/swap item from inventory |
select item from inventory` |
queue action-dict | - | - |
select flee |
queue action-dict | - | - | - |
select hold, doing nothing |
queue action-dict | - | - | - |
Looking at the above table we can see that we have a lot of re-use. The selection of allied/enemy/target/recipient/item represent nodes that can be shared by different actions.
Each of these actions also follow a linear sequence, like the step-by step 'wizard' you see in some software. We want to be able to step back and forth in each sequence, and also abort the action if you change your mind along the way.
After queueing the action, we should always go back to the base node where we will wait until the round ends and all actions are executed.
We will create a few helpers to make our particular menu easy to work with.
The node index
These are the nodes we need for our menu:
# not coded anywhere yet, just noting for reference
node_index = {
# node names # callables # (future callables)
"node_choose_enemy_target": None, # node_choose_enemy_target,
"node_choose_allied_target": None, # node_choose_allied_target,
"node_choose_enemy_recipient": None, # node_choose_enemy_recipient,
"node_choose_allied_recipient": None, # node_choose_allied_recipient,
"node_choose_ability": None, # node_choose_ability,
"node_choose_use_item": None, # node_choose_use_item,
"node_choose_wield_item": None, # node_choose_wield_item,
"node_combat": None, # node_combat,
}
All callables are left as None since we haven't created them yet. But it's good to note down the expected names because we need them in order to jump from node to node. The important one to note is that node_combat will be the base node we should get back to over and over.
Getting or setting the combathandler
# in evadventure/combat_turnbased.py
from evennia import EvMenu
# ...
def _get_combathandler(caller, turn_timeout=30, flee_time=3, combathandler_key="combathandler"):
return EvAdventureTurnbasedCombatHandler.get_or_create_combathandler(
caller.location,
interval=turn_timeout,
attributes=[("flee_time", flee_time)],
key=combathandler_key,
)
We only add this to not have to write as much when calling this later. We pass caller.location, which is what retrieves/creates the combathandler on the current location. The interval is how often the combathandler (which is a Script) will call its at_repeat method. We set the flee_time Attribute at the same time.
Queue an action
This is our first "goto function". This will be called to actually queue our finished action-dict with the combat handler. After doing that, it should return us to the base node_combat.
# in evadventure/combat_turnbased.py
# ...
def _queue_action(caller, raw_string, **kwargs):
action_dict = kwargs["action_dict"]
_get_combathandler(caller).queue_action(caller, action_dict)
return "node_combat"
We make one assumption here - that kwargs contains the action_dict key with the action-dict ready to go.
Since this is a goto-callable, we must return the next node to go to. Since this is the last step, we will always go back to the node_combat base node, so that's what we return.
Rerun a node
A special feature of goto callables is the ability to rerun the same node by returning None.
# in evadventure/combat_turnbased.py
# ...
def _rerun_current_node(caller, raw_string, **kwargs):
return None, kwargs
Using this in an option will rerun the current node, but will preserve the kwargs that were sent in.
Stepping through the wizard
Our particular menu is very symmetric - you select an option and then you will just select a series of option before you come back. So we will make another goto-function to help us easily do this. To understand, let's first show how we plan to use this:
# in the base combat-node function (just shown as an example)
options = [
# ...
"desc": "use an item on an enemy",
"goto": (
_step_wizard,
{
"steps": ["node_choose_use_item", "node_choose_enemy_target"],
"action_dict": {"key": "use", "item": None, "target": None},
}
)
]
When the user chooses to use an item on an enemy, we will call _step_wizard with two keywords steps and action_dict. The first is the sequence of menu nodes we need to guide the player through in order to build up our action-dict.
The latter is the action_dict itself. Each node will gradually fill in the None places in this dict until we have a complete dict and can send it to the _queue_action goto function we defined earlier.
Furthermore, we want the ability to go "back" to the previous node like this:
# in some other node (shown only as an example)
def some_node(caller, raw_string, **kwargs):
# ...
options = [
# ...
{
"key": "back",
"goto": ( _step_wizard, {**kwargs, **{"step": "back"}})
},
]
# ...
Note the use of ** here. {**dict1, **dict2} is a powerful one-liner syntax to combine two dicts into one. This preserves (and passes on) the incoming kwargs and just adds a new key "step" to it. The end effect is similar to if we had done kwargs["step"] = "back" on a separate line (except we end up with a new dict when using the **-approach).
So let's implement a _step_wizard goto-function to handle this!
# in evadventure/combat_turnbased.py
# ...
def _step_wizard(caller, raw_string, **kwargs):
# get the steps and count them
steps = kwargs.get("steps", [])
nsteps = len(steps)
# track which step we are on
istep = kwargs.get("istep", -1)
# check if we are going back (forward is default)
step_direction = kwargs.get("step", "forward")
if step_direction == "back":
# step back in wizard
if istep <= 0:
# back to the start
return "node_combat"
istep = kwargs["istep"] = istep - 1
return steps[istep], kwargs
else:
# step to the next step in wizard
if istep >= nsteps - 1:
# we are already at end of wizard - queue action!
return _queue_action(caller, raw_string, **kwargs)
else:
# step forward
istep = kwargs["istep"] = istep + 1
return steps[istep], kwargs
This depends on passing around steps, step and istep with the **kwargs. If step is "back" then we will go back in the sequence of steps otherwise forward. We increase/decrease the istep key value to track just where we are.
If we reach the end we call our _queue_action helper function directly. If we back up to the beginning we return to the base node.
We will make one final helper function, to quickly add the back (and abort) options to the nodes that need it:
# in evadventure/combat_turnbased.py
# ...
def _get_default_wizard_options(caller, **kwargs):
return [
{
"key": "back",
"goto": (_step_wizard, {**kwargs, **{"step": "back"}})
},
{
"key": "abort",
"goto": "node_combat"
},
{
"key": "_default",
"goto": (_rerun_current_node, kwargs),
},
]
This is not a goto-function, it's just a helper that we will call to quickly add these extra options a node's option list and not have to type it out over and over.
As we've seen before, the back option will use the _step_wizard to step back in the wizard. The abort option will simply jump back to the main node, aborting the wizard.
The _default option is special. This option key tells EvMenu: "use this option if none of the other match". That is, if they enter an empty input or garbage, we will just re-display the node. We make sure pass along the kwargs though, so we don't lose any information of where we were in the wizard.
Finally we are ready to write our menu nodes!
Choosing targets and recipients
These nodes all work the same: They should present a list of suitable targets/recipients to choose from and then put that result in the action-dict as either target or recipient key.
:linenos:
:emphasize-lines: 11,13,15,18,23
# in evadventure/combat_turnbased.py
# ...
def node_choose_enemy_target(caller, raw_string, **kwargs):
text = "Choose an enemy to target"
action_dict = kwargs["action_dict"]
combathandler = _get_combathandler(caller)
_, enemies = combathandler.get_sides(caller)
options = [
{
"desc": target.get_display_name(caller),
"goto": (
_step_wizard,
{**kwargs, **{"action_dict": {**action_dict, **{"target": target}}}},
)
}
for target in enemies
]
options.extend(_get_default_wizard_options(caller, **kwargs))
return text, options
def node_choose_enemy_recipient(caller, raw_string, **kwargs):
# almost the same, except storing "recipient"
def node_choose_allied_target(caller, raw_string, **kwargs):
# almost the same, except using allies + yourself
def node_choose_allied_recipient(caller, raw_string, **kwargs):
# almost the same, except using allies + yourself and storing "recipient"
- Line 11: Here we use
combathandler.get_sides(caller)to get the 'enemies' from the perspective ofcaller(the one using the menu). - Line 13-31: This is a loop over all enemies we found.
- Line 15: We use
target.get_display_name(caller). This method (a default method on all EvenniaObjects) allows the target to return a name while being aware of who's asking. It's what makes an admin seeName (#5)while a regular user just seesName. If you didn't care about that, you could just dotarget.keyhere. - Line 18: This line looks complex, but remember that
{**dict1, **dict2}is a one-line way to merge two dicts together. What this does is to do this in three steps:- First we add
action_dicttogether with a dict{"target": target}. This has the same effect as doingaction_dict["target"] = target, except we create a new dict out of the merger. - Next we take this new merger and creates a new dict
{"action_dict": new_action_dict}. - Finally we merge this with the existing
kwargsdict. The result is a new dict that now has the updated"action_dict"key pointing to an action-dict wheretargetis set.
- First we add
- Line 15: We use
- Line 23: We extend the
optionslist with the default wizard options (back,abort). Since we made a helper function for this, this is only one line.
Creating the three other needed nodes node_choose_enemy_recipient, node_choose_allied_target and node_choose_allied_recipient are following the same pattern; they just use either the allies or enemies return from combathandler.get_sides(). It then sets either the targetorrecipientfield in theaction_dict`. We leave these up to the reader to implement.
Choose an Ability
For Stunts, we need to be able to select which Knave Ability (STR, DEX etc) you want to boost/foil.
# in evadventure/combat_turnbased.py
from .enums import Ability
# ...
def node_choose_ability(caller, raw_string, **kwargs):
text = "Choose the ability to apply"
action_dict = kwargs["action_dict"]
options = [
{
"desc": abi.value,
"goto": (
_step_wizard,
{
**kwargs,
**{
"action_dict": {**action_dict, **{"stunt_type": abi, "defense_type": abi}},
},
},
),
}
for abi in (
Ability.STR,
Ability.DEX,
Ability.CON,
Ability.INT,
Ability.WIS,
Ability.CHA,
)
]
options.extend(_get_default_wizard_options(caller, **kwargs))
return text, options
The principle is the same as for the target/recipient-setter nodes, except that we just provide a list of the abilities to choose from. We update the stunt_type and defense_type keys in the action_dict, as needed by the Stunt action.
Choose an item to use or wield
# in evadventure/combat_turnbased.py
# ...
def node_choose_use_item(caller, raw_string, **kwargs):
text = "Select the item"
action_dict = kwargs["action_dict"]
options = [
{
"desc": item.get_display_name(caller),
"goto": (
_step_wizard,
{**kwargs, **{"action_dict": {**action_dict, **{"item": item}}}},
),
}
for item in caller.equipment.get_usable_objects_from_backpack()
]
if not options:
text = "There are no usable items in your inventory!"
options.extend(_get_default_wizard_options(caller, **kwargs))
return text, options
def node_choose_wield_item(caller, raw_string, **kwargs):
# same except using caller.equipment.get_wieldable_objects_from_backpack()
Our equipment handler has the very useful help method .get_usable_objects_from_backpack. We just call this to get a list of all the items we want to choose. Otherwise this node should look pretty familiar by now.
The node_choose_wield_item is very similar, except it uses caller.equipment.get_wieldable_objects_from_backpack() instead. We'll leave the implementation of this up to the reader.
The main menu node
This ties it all together.
# in evadventure/combat_turnbased.py
# ...
def node_combat(caller, raw_string, **kwargs):
"""Base combat menu"""
combathandler = _get_combathandler(caller)
text = combathandler.get_combat_summary(caller)
options = [
{
"desc": "attack an enemy",
"goto": (
_step_wizard,
{
"steps": ["node_choose_enemy_target"],
"action_dict": {"key": "attack", "target": None, "repeat": True},
},
),
},
{
"desc": "Stunt - gain a later advantage against a target",
"goto": (
_step_wizard,
{
"steps": [
"node_choose_ability",
"node_choose_enemy_target",
"node_choose_allied_recipient",
],
"action_dict": {"key": "stunt", "advantage": True},
},
),
},
{
"desc": "Stunt - give an enemy disadvantage against yourself or an ally",
"goto": (
_step_wizard,
{
"steps": [
"node_choose_ability",
"node_choose_enemy_recipient",
"node_choose_allied_target",
],
"action_dict": {"key": "stunt", "advantage": False},
},
),
},
{
"desc": "Use an item on yourself or an ally",
"goto": (
_step_wizard,
{
"steps": ["node_choose_use_item", "node_choose_allied_target"],
"action_dict": {"key": "use", "item": None, "target": None},
},
),
},
{
"desc": "Use an item on an enemy",
"goto": (
_step_wizard,
{
"steps": ["node_choose_use_item", "node_choose_enemy_target"],
"action_dict": {"key": "use", "item": None, "target": None},
},
),
},
{
"desc": "Wield/swap with an item from inventory",
"goto": (
_step_wizard,
{
"steps": ["node_choose_wield_item"],
"action_dict": {"key": "wield", "item": None},
},
),
},
{
"desc": "flee!",
"goto": (_queue_action, {"action_dict": {"key": "flee", "repeat": True}}),
},
{
"desc": "hold, doing nothing",
"goto": (_queue_action, {"action_dict": {"key": "hold"}}),
},
{
"key": "_default",
"goto": "node_combat",
},
]
return text, options
This starts off the _step_wizard for each action choice. It also lays out the action_dict for every action, leaving None values for the fields that will be set by the following nodes.
Note how we add the "repeat" key to some actions. Having them automatically repeat means the player doesn't have to insert the same action every time.
Attack Command
We will only need one single command to run the turnbased combat system. This is the attack command. Once you use it once, you will be in the menu.
# in evadventure/combat_turnbased.py
from evennia import Command, CmdSet, EvMenu
# ...
class CmdTurnAttack(Command):
"""
Start or join combat.
Usage:
attack [<target>]
"""
key = "attack"
aliases = ["hit", "turnbased combat"]
turn_timeout = 30 # seconds
flee_time = 3 # rounds
def parse(self):
super().parse()
self.args = self.args.strip()
def func(self):
if not self.args:
self.msg("What are you attacking?")
return
target = self.caller.search(self.args)
if not target:
return
if not hasattr(target, "hp"):
self.msg("You can't attack that.")
return
elif target.hp <= 0:
self.msg(f"{target.get_display_name(self.caller)} is already down.")
return
if target.is_pc and not target.location.allow_pvp:
self.msg("PvP combat is not allowed here!")
return
combathandler = _get_combathandler(
self.caller, self.turn_timeout, self.flee_time)
# add combatants to combathandler. this can be done safely over and over
combathandler.add_combatant(self.caller)
combathandler.queue_action(self.caller, {"key": "attack", "target": target})
combathandler.add_combatant(target)
target.msg("|rYou are attacked by {self.caller.get_display_name(self.caller)}!|n")
combathandler.start_combat()
# build and start the menu
EvMenu(
self.caller,
{
"node_choose_enemy_target": node_choose_enemy_target,
"node_choose_allied_target": node_choose_allied_target,
"node_choose_enemy_recipient": node_choose_enemy_recipient,
"node_choose_allied_recipient": node_choose_allied_recipient,
"node_choose_ability": node_choose_ability,
"node_choose_use_item": node_choose_use_item,
"node_choose_wield_item": node_choose_wield_item,
"node_combat": node_combat,
},
startnode="node_combat",
combathandler=combathandler,
auto_look=False,
# cmdset_mergetype="Union",
persistent=True,
)
class TurnCombatCmdSet(CmdSet):
"""
CmdSet for the turn-based combat.
"""
def at_cmdset_creation(self):
self.add(CmdTurnAttack())
The attack target Command will determine if the target has health (only things with health can be attacked) and that the room allows fighting. If the target is a pc, it will check so PvP is allowed.
It then proceeds to either start up a new command handler or reuse a new one, while adding the attacker and target to it. If the target was already in combat, this does nothing (same with the .start_combat() call).
As we create the EvMenu, we pass it the "menu index" we talked to about earlier, now with the actual node functions in every slot. We make the menu persistent so it survives a reload.
To make the command available, add the TurnCombatCmdSet to the Character's default cmdset.
Making sure the menu stops
The combat can end for a bunch of reasons. When that happens, we must make sure to clean up the menu so we go back normal operation. We will add this to the remove_combatant method on the combat handler (we left a TODO there before):
# in evadventure/combat_turnbased.py
# ...
class EvadventureTurnbasedCombatHandler(EvAdventureCombatBaseHandler):
# ...
def remove_combatant(self, combatant):
"""
Remove a combatant from the battle.
"""
self.combatants.pop(combatant, None)
# clean up menu if it exists
if combatant.ndb._evmenu: # <--- new
combatant.ndb._evmenu.close_menu() # ''
When the evmenu is active, it is avaiable on its user as .ndb._evmenu (see the EvMenu docs). When we are removed from combat, we use this to get the evmenu and call its close_menu() method to shut down the menu.
Our turnbased combat system is complete!
Testing
See an example tests in `evennia/contrib/tutorials`, in [evadventure/tests/test_combat.py](evennia.contrib.tutorials.evadventure.tests.test_combat)
Unit testing of the Turnbased combat handler is straight forward, you follow the process of earlier lessons to test that each method on the handler returns what you expect with mocked inputs.
Unit-testing the menu is more complex. You will find examples of doing this in evennia.utils.tests.test_evmenu.
A small combat test
Unit testing the code is not enough to see that combat works. We need to also make a little 'functional' test to see how it works in practice.
This is what we need for a minimal test:
- A room with combat enabled.
- An NPC to attack (it won't do anything back yet since we haven't added any AI)
- A weapon we can
wield. - An item (like a potion) we can
use.
You can find an example combat batch-code script in `evennia/contrib/tutorials/evadventure/`, in [batchscripts/turnbased_combat_demo.py](github:evennia/contrib/tutorials/evadventure/batchscripts/turnbased_combat_demo.py)
In The Twitch combat lesson we used a batch-command script to create the testing environment in game. This runs in-game Evennia commands in sequence. For demonstration purposes we'll instead use a batch-code script, which runs raw Python code in a repeatable way. A batch-code script is much more flexible than a batch-command script.
Create a new subfolder
evadventure/batchscripts/(if it doesn't already exist)
Create a new Python module
evadventure/batchscripts/combat_demo.py
A batchcode file is a valid Python module. The only difference is that it has a # HEADER block and one or more # CODE sections. When the processor runs, the # HEADER part will be added on top of each # CODE part before executing that code block in isolation. Since you can run the file from in-game (including refresh it without reloading the server), this gives the ability to run longer Python codes on-demand.
# Evadventure (Turnbased) combat demo - using a batch-code file.
#
# Sets up a combat area for testing turnbased combat.
#
# First add mygame/server/conf/settings.py:
#
# BASE_BATCHPROCESS_PATHS += ["evadventure.batchscripts"]
#
# Run from in-game as `batchcode turnbased_combat_demo`
#
# HEADER
from evennia import DefaultExit, create_object, search_object
from evennia.contrib.tutorials.evadventure.characters import EvAdventureCharacter
from evennia.contrib.tutorials.evadventure.combat_turnbased import TurnCombatCmdSet
from evennia.contrib.tutorials.evadventure.npcs import EvAdventureNPC
from evennia.contrib.tutorials.evadventure.rooms import EvAdventureRoom
# CODE
# Make the player an EvAdventureCharacter
player = caller # caller is injected by the batchcode runner, it's the one running this script # E: undefined name 'caller'
player.swap_typeclass(EvAdventureCharacter)
# add the Turnbased cmdset
player.cmdset.add(TurnCombatCmdSet, persistent=True)
# create a weapon and an item to use
create_object(
"contrib.tutorials.evadventure.objects.EvAdventureWeapon",
key="Sword",
location=player,
attributes=[("desc", "A sword.")],
)
create_object(
"contrib.tutorials.evadventure.objects.EvAdventureConsumable",
key="Potion",
location=player,
attributes=[("desc", "A potion.")],
)
# start from limbo
limbo = search_object("#2")[0]
arena = create_object(EvAdventureRoom, key="Arena", attributes=[("desc", "A large arena.")])
# Create the exits
arena_exit = create_object(DefaultExit, key="Arena", location=limbo, destination=arena)
back_exit = create_object(DefaultExit, key="Back", location=arena, destination=limbo)
# create the NPC dummy
create_object(
EvAdventureNPC,
key="Dummy",
location=arena,
attributes=[("desc", "A training dummy."), ("hp", 1000), ("hp_max", 1000)],
)
If editing this in an IDE, you may get errors on the player = caller line. This is because caller is not defined anywhere in this file. Instead caller (the one running the script) is injected by the batchcode runner.
But apart from the # HEADER and # CODE specials, this just a series of normal Evennia api calls.
Log into the game with a developer/superuser account and run
> batchcode evadventure.batchscripts.turnbased_combat_demo
This should place you in the arena with the dummy (if not, check for errors in the output! Use objects and delete commands to list and delete objects if you need to start over.)
You can now try attack dummy and should be able to pound away at the dummy (lower its health to test destroying it). If you need to fix something, use q to exit the menu and get access to the reload command (for the final combat, you can disable this ability by passing auto_quit=False when you create the EvMenu).
Conclusions
At this point we have covered some ideas on how to implement both twitch- and turnbased combat systems. Along the way you have been exposed to many concepts such as classes, scripts and handlers, Commands, EvMenus and more.
Before our combat system is actually usable, we need our enemies to actually fight back. We'll get to that next.