diff --git a/Installing-Tracks-2.2.2-on-CentOS-6.5-Minimal-x86_64.md b/Installing-Tracks-2.2.2-on-CentOS-6.5-Minimal-x86_64.md
index 2dbf686..1b3f97c 100644
--- a/Installing-Tracks-2.2.2-on-CentOS-6.5-Minimal-x86_64.md
+++ b/Installing-Tracks-2.2.2-on-CentOS-6.5-Minimal-x86_64.md
@@ -1,7 +1,5 @@
 Installing Tracks 2.2.2 on CentOS 6.5 Minimal x86_64
 
-https://github.com/TracksApp/tracks/wiki/Installing-Tracks-2.2.2-on-CentOS-6.5-Minimal-x86_64
-
 Build Overview
 
 1. Base Operating System
@@ -33,26 +31,27 @@ Network Interface Settings
 http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-networkscripts-interfaces.html
 
 The default interface settings will be as follows with the exception that your HWADDR and UUID will differ:
-`[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0`
 
-`DEVICE=eth0`
-`HWADDR=00:0C:29:C5:0D:BD`
-`TYPE=Ethernet`
-`UUID=0250e398-8918-4e9d-afd7-7ae04258810f`
-`ONBOOT=no`
-`NM_CONTROLLED=yes`
-`BOOTPROTO=dhcp`
+`[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
 
-`[root@localhost ~]# ifconfig`
+DEVICE=eth0
+HWADDR=00:0C:29:C5:0D:BD
+TYPE=Ethernet
+UUID=0250e398-8918-4e9d-afd7-7ae04258810f
+ONBOOT=no
+NM_CONTROLLED=yes
+BOOTPROTO=dhcp
 
-`lo        Link encap:Local Loopback`
-          `inet addr:127.0.0.1  Mask:255.0.0.0`
-          `inet6 addr: ::1/128 Scope:Host`
-          `UP LOOPBACK RUNNING  MTU:16436  Metric:1`
-          `RX packets:0 errors:0 dropped:0 overruns:0 frame:0`
-          `TX packets:0 errors:0 dropped:0 overruns:0 carrier:0`
-          `collisions:0 txqueuelen:0`
-          `RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)`
+[root@localhost ~]# ifconfig
+
+lo        Link encap:Local Loopback
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          inet6 addr: ::1/128 Scope:Host
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)`
 
 
 If you desire to use DHCP, update ifcfg-eth0 using ONBOOT value from no to yes, save, then restart network services.